Introducing FEA Consulting

 

FEA Analysis

FEA Analysis Services from BroadTech Engineering provides Next Generation Solutions that Solve Today’s Toughest Engineering Challenges.

 

Fatigue Failure Analysis

Fatigue Failure Analysis Services is at the heart of what we do at BroadTech Engineering Singapore. Through our FEA services, we can use world-class FEA software to assist you in solving complex structural engineering problems to enable you to make a calculated and accurate engineering design decision within a shorter span of time.
 

Industry Engineering Usage 

Since Several Engineering systems are subjected to Loading Forces that is Highly dynamic at some Stage in the lifecycle, understanding the dynamic Nature of Mechanical structure Design is a Highly important Subject of Interest in many Engineering fields. Femap NX Nastran Offers a complete FEA Finite Element Analysis solution to predict dynamic behavior, be it for a Single component, Subassembly or the Whole complete Mechanical system. 
 

1. Automotive and Industry transportation 

NVH performance strongly Affects the Consumer Driver Enjoyment and perception of Built Reliability.
Femap NX Nastran FEA Simulation Software Provides End-to-End FEM Stress Analysis tools and Multiphysics solvers to predict NVH Behavior and analyze the root cause of noise and vibration problems. 
 

2. Aerospace and defense 

FEA Packages and Computational Structural Dynamics Software such as Femap NX Nastran helps FEA Consultancy Organization and FEA Consulting Engineers Recognise the Structure weaknesses of An given Existing Structural design and optimize the General vibration and dynamic performance of Aerospace structures subjected to Advanced dynamic loading Force.
 Dedicated Vibration Analysis solutions for Mechanical Rotation dynamics Assist FEA Consultants assess the Engineering performance of aero-engines to Minimize Performance instabilities.
 

 

Finite element method adaptive order for acoustics

The finite element method adaptive order (FEMAO) is a higher-order polynomial tech­nique that Offers Very Precise and faster solutions for acoustic and vibroacoustic FEM Software analyses. FEA Software can use the FEMAO method for the one-way coupling of vibroacoustic FEA Simulation, two-way coupling of vibroacoustic FEA analysis, and uncoupled acoustic FEA analysis. 
FEA Software Simulation can use the FEMAO method for predicting acoustic transfer functions for pass-by Acoustic noise, aircraft engine fan noise, perfecting transmission Energy loss for a Big volume industrial muffler, etc.
 

Integrating Simcenter 3D and Femap

Siemens’ strategy is to develop Simcenter Femap NX Nastran for the most advanced and demanding FEA Engineering Services users.
The same robust capabilities are then Fully integrated with Simcenter 3D and Femap™ software tools to benefit a Broader FEA Finite Analysis Software user Circle. Solver and graphics teams Collaborate Intimately, making sure Improvements to Simcenter Femap NX Nastran Core capabilities are Quickly supported by corresponding advances in Simcenter 3D and Femap.
 
…robust FEA Simulation Features are then Seamlessly integrated with Simcenter 3D and Femap FEA software tools to Tremendously benefit a Broader community.

 

Overview

 

LS-DYNA Consulting

3. EM SC Consulting

1. PCB Simulation
2. SI, PI, S-Parameters
3. Return/Insertion Loss
4. Cross Talk, Eye Diagram
5. RLC Extraction

About Us

BroadTech Engineering is a Leading Engineering Simulation and Numerical Modelling Consultancy in Singapore.
We Help Our Clients Gain Valuable Insights to Optimize and Improve Product Performance, Reliability, and Efficiency.
 

 

Questions?
Contact Us!

Please fill out the form below. Our friendly customer service staff will get back to you as soon as we can.
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting

Featured Fatigue Failure Analysis Case Studies

 

TPA (transfer path analysis) on double clamped beam with centrifugal pump

My undergraduate thesis about TPA (transfer path analysis) on a double clamped beam with a centrifugal pump as a source. The goal of my research is to know the vibration pattern via operational force on beam due to vibration pump as feature damage detection. My research methodology use simulation ANSYS(finite element software) and experimental with fast Fourier transform(FFT) and TPA method appropriate to ISO 13373-1 (condition monitoring of rotating machine). The material of the beam is ASTM A36. The result shows that the feature damage on a pump-beam system can be detected using the TPA method.
 
 

Pin Fatigue Life Analysis by Ansys Software 

 

1. FEA Simulation objective:
• To analyze the fatigue failure life cycle of resonation pin.
 
2. FEA Simulation Methodology and Approach:
  • Created assembly model using 3rd party software (solid works)
  • Assin material of each part from engineering database
  • Generate mesh for model
  • Assign fixed support and force that acting on the pin and the direction
  • Analyse the model with equivalent stress and total deformation of the system
  • Assign safety factor analysis
  • Assign the oscillating pin design life cycle 1e+06

3. Outcome & Conclusion

  • The maximum fatigue life cycle which can obtain is 60000cycle and the safety factor minimum value is 3 and max is 15.
  • The conclusion derived from the simulation studies is to achieve the least 1000000 life cycle the pin needed to be size up pin dimension from 3 to 15.
 
 

Progressive failure of a woven hybrid composite RVE

This simulation studies the in-plane failure mechanism of hybrid woven composite with interweaving carbon yarns and UHMWPE yarns. A mesoscale RVE model is established to provide insights into the local mechanical responses. The yarns are modeled as transversely isotropic with progressive damage laws. The epoxy resin pocket is modeled as an elastoplastic material with isotropic damage. The damage model is implemented into a user-defined material model (VUMAT) in the FE code Abaqus/Explicit. The proposed model is correlated and validated using local strain distributions and global effective stress-strain responses. The predicted surface strain contours correlated reasonably well with the DIC results. The damage morphology of each constituent observed in the experiment shows good agreement with the prediction of the FE model.

Features & Benefits of FEA Consulting 

An actual physical engineering test can reveal you of an 

Our Engineering Consulting Clients

BroadTech Engineering works closely with clients across a diversity of key industries in Singapore, such as Electronics, Energy, Aerospace, Marine, Government, and Building & Construction.

BroadTech Engineering Client

 

 

Questions?
Contact Us!

Please fill out the form below. Our friendly customer service staff will get back to you as soon as we can.

Featured Simulation Case Study

building energy design

 

 

shaft failure

 

 

 

high speed cabin

 

 

 

nozzle development

 

 

 

Call Us For a Free FEA Consultation

If you are still interested in learning more about our Consulting Services and to see what it can do for you, simply call to contact us today at +6581822236 for a no obligation discussion of your needs. Our knowledgeable and friendly engineering representative will be happy to assist.

Alternatively, for quote request, simply email us your detailed technical specification needs & requirements to info@broadtechengneering.com

1. Powerful Simulation Software Tools

1. Powerful Simulation Software Tools

2. Simulation Consultants with Extensive Research & Professional Experience

2. Simulation Consultants with Extensive Research & Professional Experience

3. Simulation projects Completed in a Timely and Cost-effective Manner

3. Simulation projects Completed in a Timely and Cost-effective Manner

4. Proven Track Record

4. Proven Track Record

5. Affordable

5. Affordable

6. Full Knowledge Transfer

6. Full Knowledge Transfer

Contact Info

✉   info(at)broadtechengineering.com
 
☎   (+65) 850 85097
 
22 Sin Ming Lane, Midview City, Singapore 573969

Our Partners

Siemens PLM Partner_BroadTech

Proplus Partner_Logo_730x200

 

Consulting

Over the years, BroadTech Engineering has Set Itself Apart By Striving To Exceed Client Expectations In Terms of Accuracy, Timeliness and Knowledge Transfer. Our Process is Both Cost-Effective and Collaborative, Ensuring That We Solve Our Clients Problems.

  1. FEA Consulting
  2. CFD Consulting
  3. Electronic Design Consulting
  4. Semiconductor Design Consulting

Software

At BroadTech Engineering, we are seasoned experts in Star CCM+ and ProPlus Software in our daily work.
We can help walk you through the software acquisition process, installation, and technical support.

  1. Siemens Star CCM+
  2. Femap (FEA)
  3. HEEDS Design Optimization
  4. Solid Edge (CAD)
  5. Proplus Solutions SPICE Simulator
  6. Proplus Solutions DFY Platform
  7. Proplus Solutions High-Capacity Waveform Viewer

.

Discuss With Us Your Project!