+65 81822236 (Whatsapp/Call) info@broadtechengineering.com

Introducing FEA Consulting

 

FEA Analysis

FEA Analysis Services from BroadTech Engineering provides Next Generation Solutions that Solve Today’s Toughest Engineering Challenges.

 

Piping Engineering Consultants

Piping Engineering Consultant Services is at the heart of what we do at BroadTech Engineering Singapore. Through our FEA services, we have the capability to use world-class FEA software to assist you in solving complex structural engineering problems so as to enable you to make a calculated and accurate engineering design decision within a shorter span of time.
 

 

Femap Nastran Dynamic Response

Femap Nastran Dynamic Response Analysis FEA Solution is the Main Physics -physics solver for dynamic finite element analysis (FEA).
The Nonlinear FEA Software enables the Complex forced response Simulation of a component or assembly subject to time- or frequency-varying excitations.
Assessing dynamic response under Various operating conditions is Important to Engineering industries such as automotive, aerospace, consumer products and Any sectors that rely on electronic devices. It is possible to use the Mechanical Engineering FEA Software to perform Several what-if studies by virtually investigating the product Variant’s performance in various dynamic Operatiooperating conditions by using the rich FEA Stress analysis Software Features set supported by Femap Nastran Dynamic Response.
 

Finding Just the Perfect combination

 

Coupled physics
In the Actual world, Engineered product Performance is not Just determined by a single, isolated physical domain. Instead, Impact from one physical phenomenon will Concurrently impact how a product reacts to  another physical domain.
For Instance in the Application of Thermal FEM Structural analysis, and Pipe Stress Analysis thermal-mechanical effects are Extremely Important to Aerospace engine Development .

 

Overview

 

LS-DYNA Consulting

3. EM SC Consulting

1. PCB Simulation
2. SI, PI, S-Parameters
3. Return/Insertion Loss
4. Cross Talk, Eye Diagram
5. RLC Extraction

About Us

BroadTech Engineering is a Leading Engineering Simulation and Numerical Modelling Consultancy in Singapore.
We Help Our Clients Gain Valuable Insights to Optimize and Improve Product Performance, Reliability, and Efficiency.

Questions?
Contact Us!

Please fill out the form below. Our friendly customer service staff will get back to you as soon as we can.
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting
3. LS-DYNA Consulting

Featured Piping Engineering Consulting Case Studies

 
FEA Structural analysis of the automotive engine
1. FEA Simulation objective:
Structural analysis of automotive engine for primary sealing (Head gasket) evaluation.
2. FEA Simulation Methodology:
Worked on non-linear contact analysis with Cylinder head, non-linear gasket, bolts, liner and crankcase considering pre-tension of cylinder head bolts, combustion pressure, and temperature effect. Our FEA Consultant used ABAQUS solver for FEA and GT-Suite for Engine performance simulation to predict engine power and temperature effect during combustion. CFD of water coolant has been carried out by the team to predict temperature distribution on engine parts. Our FEA Consultant supported on gasket design changes to meet the requirement of seal proof arrangement and bore distortion.
3. Outcome and Conclusion –
 The temperature of parts has correlated with tested thermocouple points to get more accurate thermal distribution. The contact pressure in pre-tension has correlated with Fuji film test data to get confirmation on the continuation of analysis in operating conditions. Different types of beads are tried out in analysis to distribute bolt loads to reduce bore distortion on the liner.
 

Modal and Fatigue Analysis on Planetary Gear

In these projects, two different simulations are carried out which are Modal and fatigue analysis over the wind turbine epicyclic gearbox. In modal analysis, natural frequency and the displacement magnitude are carried out. The Vibration modes of the planetary gears are enumerated. In fatigue analysis, two simulation are performed such as with crack and without crack. Failure stage of the gears are identified at high cyclic load. The complete simulation are performed using ABAQUS CAE tool.

Features & Benefits of FEA Consulting 

An actual physical engineering test can reveal you of an 

Our Engineering Consulting Clients

BroadTech Engineering works closely with clients across a diversity of key industries in Singapore, such as Electronics, Energy, Aerospace, Marine, Government, and Building & Construction.

BroadTech Engineering Client

Questions?
Contact Us!

Please fill out the form below. Our friendly customer service staff will get back to you as soon as we can.

Featured Simulation Case Study

building energy design

 

 

shaft failure

 

 

 

high speed cabin

 

 

 

nozzle development

 

 

 

Call Us For a Free FEA Consultation

If you are still interested in learning more about our Consulting Services and to see what it can do for you, simply call to contact us today at +6581822236 for a no obligation discussion of your needs. Our knowledgeable and friendly engineering representative will be happy to assist.

Alternatively, for quote request, simply email us your detailed technical specification needs & requirements to info@broadtechengneering.com

1. Powerful Simulation Software Tools

1. Powerful Simulation Software Tools

2. Simulation Consultants with Extensive Research & Professional Experience

2. Simulation Consultants with Extensive Research & Professional Experience

3. Simulation projects Completed in a Timely and Cost-effective Manner

3. Simulation projects Completed in a Timely and Cost-effective Manner

4. Proven Track Record

4. Proven Track Record

5. Affordable

5. Affordable

6. Full Knowledge Transfer

6. Full Knowledge Transfer

LS-DYNA Consulting

3. Electromagnetics & Semiconductors Simulation

1. PCB Simulation - High-Speed /High-Frequency Simulation
2. Signal Integrity, Power Integrity, S-Parameters
3. Return Loss, Insertion Loss
4. Cross Talk, Eye Diagram
5. RLC Extraction
6. IR Drop, Decap Optimization

Services

Products

Contact Info

✉   info(at)broadtechengineering.com
 
☎   (+65) 81822236
 
7 Temasek Boulevard,
No 12-07, Suntec Tower 1,
Singapore 038987

Our Partners

Siemens PLM Partner_BroadTech

Proplus Partner_Logo_730x200

 

Consulting

Over the years, BroadTech Engineering has Set Itself Apart By Striving To Exceed Client Expectations In Terms of Accuracy, Timeliness and Knowledge Transfer. Our Process is Both Cost-Effective and Collaborative, Ensuring That We Solve Our Clients Problems.

  1. FEA Consulting
  2. CFD Consulting
  3. Electronic Design Consulting
  4. Semiconductor Design Consulting

Software

At BroadTech Engineering, we are seasoned experts in Star CCM+ and ProPlus Software in our daily work.
We can help walk you through the software acquisition process, installation, and technical support.

  1. Siemens Star CCM+
  2. Femap (FEA)
  3. HEEDS Design Optimization
  4. Solid Edge (CAD)
  5. Proplus Solutions SPICE Simulator
  6. Proplus Solutions DFY Platform
  7. Proplus Solutions High-Capacity Waveform Viewer

.

Discuss With Us Your Project!